Repairing your Fiberglass shower and Tub

Fiberglass showers and enclosures are very strong compared to other shower enclosures. They are Gelcoated that holds the fiber grains very tight together, which gives the fiberglass its strength. But in time, due to regular wear and tear, the fiberglass tub or shower will start developing cracks or leaks. Majority of the cracks are only aesthetic and do not require to change the whole shower. But if the cracks are neglected, then the tub will start leaking and lead to costly problem.


Replacing the existing shower or tub can be a difficult task and more importantly very expensive. Most of the tubs and shower installed in homes are not easy to remove and require the entire unit to come out. If you are going to take out the whole bathroom then it is easier to just re-do the whole bathroom again. But if your budget does not allow for a complete remodel there are other ways to take care of the cracks.

Aside: For deep cracks or if you are uncertain about your bathroom then call a plumber or go to your local home improvement store for some assistance.

Shower repair kits

There are many tub and shower repair kits that are a great inexpensive solution to fixing your bathroom. The shower kits come with all the materials required to repair the tub.

Majority of the kits come with different colorants. Colorants are tinting products that color the filling. When you are finish filling the crack, you can match the color of the filling with your tub. Take your time in mixing the color until you have the right color.

For larger cracks and holes, the shower repair kit might not be sufficient. The larger cracks might require some reinforcement mesh. Call a local specialist for assistance with large holes and cracks.

When mixing the materials in your shower repair kit, make sure that you are using disposable cups. The solvents are very hard to clean and it will be easier to just use disposable containers.

Epoxy Repair Kits

Epoxy repair is also another cheap and fast way to fix cracks in the tub. But before using an epoxy you have to determine how bad the damage is in the first place. If there are any leaks that are going to the bottom floor then look at the tub from the back. It will be easier to repair the fiberglass tub from the back rather than any other area.

You have to be very fast with epoxy repair kits as they harden real fast. Before you apply the epoxy make sure that you investigate where the application needs to be placed. Once you know where it is, use the epoxy in that area. Some epoxy kits don’t come with any colorants so the end result will look like a patch in your bathtub.

Shower repairs

Repairing your shower or tub can be a very difficult task. There are easy ways to go about them with different kits. But if your damage is extensive and the tub is leaking then it will be better to call a professional. The kits work for small areas and the larger cracks and holes will require professional attention.

Posted in Shower Enclosures